Professional rechargeable lamp Fenix WF30RE is equipped with ATEX/IECex certification for use in explosive atmospheres. The lamp is powered by a specially modified Li-ion battery ARB-L21-3000Ex with a capacity of 3000 mAh and provides a luminous flux of up to 300 lumens with a beam distance of 149 meters. The battery is charged directly in the lamp via a USB-C connector. The lamp body is made of aircraft-grade aluminum with high durability and impact resistance. The lamp is intended especially for firefighters and rescuers, and is also suitable as a work light for industrial operations with the possibility of explosive dusts and gases. Examples include chemical plants, refineries, textile mills, paper mills, flour mills, metallurgical operations, power plants and other facilities.

Certificates:

• Usable in zones 1-2 of explosive gases and in zones 21-22 of explosive dust.
• Full text of certificates:
• IECEx: IECEx TUR 18.0042X:
  • Ex ib IIC T4 Gb
  • Ex ib IIIC T130°C Db
• ATEX: TÜV 18 ATEX 8252X:
  • II 2G Ex ib IIC T4 Gb
  • II 2D Ex ib IIIC T130°C Db
• The lamp also holds CSA, NEPSI and GRGT certificates.

Parameters of the WF30RE ATEX work lamp:

• A powerful Cree XP-G3 LED with a neutral light tint with a lifespan of 50,000 hours is used.
• Five output modes: 300 lumens (7.3 hours) -> 100 lumens (22.8 hours) -> 30 lumens (68 hours) -> 5 lumens (313.3 hours) -> SOS (30 lumens).
• It uses a special Fenix ARB-L21-3000Ex Li-ion battery with a capacity of 3000 mAh. It is a modified type certified for explosive atmospheres.
• The battery is charged directly in the lamp via a modern USB-C connector.
• The electronics are equipped with a protection function against deep discharge of the batteries; when the voltage drops below a certain threshold it automatically switches to a lower output mode.
• The lamp has memory and can be turned on in the last set mode, except for emergency modes (Eco and SOS).
• Battery charge level indication.
• Made of aircraft-grade hardened aluminum A6061-T6.
• Durable hard-to-scratch surface – Type III hard anodized.
• Impact resistant to drops from a height of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Textured aluminum reflector for a perfect beam with a range of 149 meters (5572 cd).
• Dimensions 15.17 cm (length) x 3.4 cm (head diameter) x 2.8 cm (body diameter).
• Weight 218 grams (including battery).
• The package includes: Fenix WF30RE lamp, Fenix ARB-L21-3000Ex battery, USB charging adapter, USB-C charging cable, EU Declaration of Conformity, spare O-ring, wrist strap, user manual, warranty card.
• A Fenix ALD-05 strap for mounting the lamp on a helmet can be purchased separately.

Operation:

When the lamp is off press and hold the switch for 0.5 seconds to turn on to the last used normal output mode (General mode). When the lamp is off, press the switch twice quickly to turn on to the emergency 5-lumen mode (Extreme mode). You can switch output modes at any time during operation by pressing the side button within the selected group of modes. When the lamp is on, press and hold the switch for 0.5 seconds to turn off.

Battery charge level indication – press the lamp button (when the lamp is off). If the indicator LED lights green, the battery is charged to more than 85%. Green blinking means 50-85% capacity. If it lights red, it is charged to 25-50%. Red blinking indicates less than 25% of battery capacity remaining.

Low battery warning - the lamp will gradually automatically switch to the lowest mode and the indicator in the button will start blinking red.

Charging - Flip open the dust cover and plug the USB-C charging cable into the charging port. After charging is complete, replace the dust cover. During charging the indicator in the button lights red. After full charge it lights green. Do not charge the lamp in an explosive atmosphere. Use the supplied USB charging adapter during charging to ensure safety.

To replace the battery, unscrew the lamp tailcap using an 8 mm Allen key. Never replace the battery in an explosive atmosphere.

Warning

• All service interventions, charging and battery replacements must be performed outside the explosive atmosphere!
• Use only the manufacturer-certified Fenix battery.
• If the rubber sealing ring on the lamp closure thread is damaged, replace it with the spare from the lamp package.
• If the lamp is blinking, does not switch to higher output modes or does not light up, it may be for one of the following reasons:
  • The battery is discharged, charge it or replace it.

Warranty

Five-year warranty on the lamp, two-year warranty on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.