Fenix E06R PRO is a powerful flat rechargeable flashlight that pushes the boundaries of pocket EDC models. Compared to its smaller variants (Fenix E06R and Fenix E03R V2.0) it offers not only a multiple higher output but also a unique combination of features including strobe, ultraviolet light, laser pointer and innovative controls. Despite its still compact flat design, which fits great in the pocket, it offers a high luminous flux of up to 1600 lumens (ANSI) and a range of up to 160 meters. The flashlight is equipped with a pair of top-tier diodes (Luminus SST20 and SFT25) that allow switching between a cool spot (spotlight) and a neutral wide (floodlight) beam. Power is provided by a built-in high-capacity Li-Pol battery of 1650 mAh, which ensures a runtime of up to 111 hours in the Moonlight economy mode. Charging is handled by a modern USB-C connector directly on the flashlight body. The Fenix E06R PRO features five modes of white long-range light, five modes of neutral wide light, UV light with a wavelength of 365 nm at 1300 mW, a red laser (pointer), and several modes of so-called Breathing light - illumination around the switch button and in the tail of the flashlight with an intensity of 0.5 to 1 lumen, which you can use for discreet signaling or locating the flashlight. It is controlled via a side button, a selector for the long and wide beams, and a tactical switch in the tail. The flashlight is supplied with a fixed clip so you can attach it to a pocket or backpack strap. The battery level indicator in the button is also practical. The flashlight is great for EDC and thanks to its flat shape you can keep it with you without it being in the way.

All flashlight parameters (luminous flux, runtime on battery, waterproofness, impact resistance and range) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E06R PRO flashlight specifications

• Two white LEDs Luminus SST-20 and SFT-25 are used, a UV diode with a wavelength of 365 nm and a red laser, all with a lifespan of 50,000 hours.
• Two tactical white light modes: turbo 1600 lumens (1.3 hours) and strobe 1600 lumens.
• Five modes of white long-range light: 1000 lumens (2.25 hours) -> 350 lumens (2.5 hours) -> 150 lumens (4.5 hours) -> 30 lumens (24 hours) -> 5 lumens (104 hours)
• Five modes of white wide light: 750 lumens (2.3 hours) -> 350 lumens (3.2 hours) -> 150 lumens (4.5 hours) -> 30 lumens (24.5 hours) -> 5 lumens (111 hours).
• UV light: 1300 mW / 365 nm.
• Red laser 0.39 mW / 650 nm (class 1).
• Pulsing light around the switch button and in the tail (Breathing light): red flashing, blue flashing, red and blue pulsing at 1 lumen and RGB pulsing and Aurora light at 0.5 lumen.
• The flashlight is powered by a built-in rechargeable battery with a capacity of 1650 mAh.
• Battery level indication in the button.
• Charging via a modern USB-C connector, which is waterproof on the inside.
• Memory for the last set white light output mode.
• Intelligent overheat protection.
• Clip for attaching to a backpack strap, pocket edge, etc.
• CNC machined body from aluminum alloy with Type III hard anodized finish against scratching.
• Dimensions 12.3 cm (length) x 3.1 cm (width) x 2.1 cm (height).
• Range 160 meters (6234 cd).
• Weight 104.1 grams (including battery).
• Waterproof according to IP66 standard (spraying with strong water jets from all directions).
• Impact resistant to drops from a height of 1 meter.
• The package includes the flashlight, a wrist strap and a USB-C charging cable.
• Optional to purchase: adapter from micro-USB to USB-C.

Usage

To turn the white light on or off press and hold the main or tail button for approximately 0.5 seconds. The four basic output modes are then cycled by pressing the same button. Turbo mode is activated by holding the tail button for 0.8 seconds. The strobe can be activated by holding the main button for 1.2 seconds. Switch between the long-range and wide reflector by pressing the oval selector button.

UV light is turned on and off by holding the purple button on the side of the flashlight for approximately 0.5 seconds.

Red laser is turned on and off by holding the red button on the side of the flashlight for approximately 0.5 seconds.

Colored button backlight and tail light - the 3D light ring around the main button including the lights in the tail of the flashlight can be turned on by double-quick-pressing the main button when the flashlight is off. Subsequent presses of the button cycle through five functions – red flashing → blue flashing → red and blue flashing → RGB light → Aurora. The light ring is turned off again by holding the main button for 0.5 seconds.

Memory of the last set mode - When the white light is turned on the flashlight always turns on to the last selected output mode.

The control buttons can be locked to prevent accidental activation, e.g. during transport in luggage - to lock, turn off the flashlight and hold both the red and purple buttons on the side of the flashlight for 2 seconds. The flashlight will then flash to signal locking. To unlock, hold the buttons again for 2 seconds.

Battery charge indication - with the flashlight off briefly press the main button once, then a small diode in the button will light for three seconds. Green light indicates the battery is charged 100-85%, green flashing 85-50%, red light indicates the battery is 50-25% charged and red flashing indicates the battery is less than 25% charged. The number of available white light modes may vary depending on the current charge level.

Overheat protection - if the flashlight temperature exceeds 60 °C, output will be automatically reduced. As soon as the temperature falls below 60 °C the output will increase again.

Low battery warning - the flashlight will gradually automatically switch to the lowest output mode and the indicator diode in the selector button will start flashing red.

Charging

• Connect the flashlight via the USB-C cable to a computer, a USB wall adapter or a car USB adapter. You can also use any mobile phone charger with a USB-C connector for charging.
• During charging the indicator LED in the button lights red, after full charge it lights green.
• Charging voltage: 5 V, max. charging power 5 W (5 V / 1 A).
• During charging the flashlight may be used except for turbo mode and color modes. The number of available white light modes may vary depending on the current charge level.
• The used battery does not suffer from memory effect, so the flashlight can be recharged at any time.

Warning

• Do not disassemble sealed parts yourself, this will void the warranty.
• If the flashlight does not switch to higher output modes or does not light up, the battery is discharged - charge the flashlight.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.